How to Improve Force Production

There are many factors that affect force production (the amount of force produced in a muscle, or muscles).  Improvements in force production can optimize sport-specific skill performance, including running, jumping, throwing, and hitting/striking.

Lift Heavy

Lifting heavy weight (e.g, 65-80% 1RM) produces greater tension in the muscle which, in turn, leads to greater motor unit (neuromuscular) recruitment, which affects force production.  The number of active motor units is directly proportional to the amount of force production.  (It should also be noted that heavy lifting and explosive concentric training [see below] have the potential to activate more fast-twitch muscle fibers)

Preloading

Preloading is the tension developed in the muscle before you move the weight.  When you bench press, deadlift, or squat, you can’t move the bar off the rack or floor until sufficient force is developed in the muscle to overcome the inertia of the barbell.

Overload Eccentric Training

Use very heavy resistance (≥ 100% 1RM) to perform “negatives,” which emphasize the lowering phase/movement of a lift.  For safety reasons, it may be advisable to use a spotter (or spotters) for certain exercises, such as the bench press, to assist in returning the weight to the original (up) position.

Explosive Concentric Training

When training for explosive concentric movements — where the goal is generating velocity — use relatively light resistance.

Plyometrics

Plyometric exercises exploit the stretch-shortening cycle to generate maximum force in minimum time.  This involves “prestretching” a muscle immediately before a concentric action to enhance force production during the subsequent muscle action.

Rest

It’s important to incorporate rest days into your training regimen in order to allow muscles time to recover and repair.

Your thoughts?

WE BUILD STRONGER ATHLETES!

We provide motivated athletes with a simple, customized training plan to help them improve performance and reduce injury risk.

Eccentric Training Improves Strength and Force Development

“Eccentric (ECC) actions, when emphasized during resistance training, may elicit greater strength adaptation, muscular hypertrophy, acute increases in subsequent concentric (CON) force capabilities, and favorable acute inflammatory response compared with traditional ECC/CON actions and CON muscle actions alone,” according to research from the Journal of Strength and Conditioning Research. (Kelly, et.al.)

Multiple studies show that athletes can augment traditional, concentric training with eccentric training to increase force capabilities.

The eccentric phase of an exercise (also known as the negative phase) is usually when the weight is lowered in preparation for the next concentric (push) action.  For example, an eccentric bench press would consist of lowering a barbell from a fully extended elbow position to the chest in a continuous, controlled manner for 3-4 seconds.

Try adding an eccentric set to your usual training.  If you usually perform three sets of a particular exercise, make the last set an eccentric set.

Or, make one training day per week an eccentric training day.  If you train three days per week, perform all exercises and sets eccentrically on your middle day.

For more advanced, proficient athletes (in the weight room), if you have access to a spotter or two, try overload eccentric training, using 100% or more of your 1RM.  (Note — a spotter is usually a good idea for many exercises, including weighted exercises done eccentrically, even with lighter loads)

This strategy is not only for weighted exercises.  Eccentric training also works well with body-weight exercises, such as the squat, pushup, chinup, dip, etc.

When is comes to strength training — think negative, gain positive.

Your thoughts?

WE WILL HELP YOU BECOME A BETTER ATHLETE!

We provide motivated athletes with a simple, customized training plan to help them improve performance and reduce injury risk.

How to Improve Force Production

There are many factors that affect force production (the amount of force produced in a muscle, or muscles).  Improvements in force production can optimize sport-specific skill performance, including running, jumping, throwing, and hitting/striking.

Lift Heavy

Lifting heavy weight (e.g, 65-80% 1RM) produces greater tension in the muscle which, in turn, leads to greater motor unit (neuromuscular) recruitment, which affects force production.  The number of active motor units is directly proportional to the amount of force production.  (It should also be noted that heavy lifting and explosive concentric training [see below] have the potential to activate more fast-twitch muscle fibers)

Preloading

Preloading is the tension developed in the muscle before you move the weight.  When you bench press, deadlift, or squat, you can’t move the bar off the rack or floor until sufficient force is developed in the muscle to overcome the inertia of the barbell.

Overload Eccentric Training

Use very heavy resistance (≥ 100% 1RM) to perform “negatives,” which emphasize the lowering phase/movement of a lift.  For safety reasons, it may be advisable to use a spotter (or spotters) for certain exercises, such as the bench press, to assist in returning the weight to the original (up) position.

Explosive Concentric Training

When training for explosive concentric movements — where the goal is generating velocity — use relatively light resistance.

Plyometrics

Plyometric exercises exploit the stretch-shortening cycle to generate maximum force in minimum time.  This involves “prestretching” a muscle immediately before a concentric action to enhance force production during the subsequent muscle action.

Rest

It’s important to incorporate rest days into your training regimen in order to allow muscles time to recover and repair.

Your thoughts?

WE WILL HELP YOU BECOME A BETTER ATHLETE!

We provide motivated athletes with a simple, customized training plan to help them improve performance and reduce injury risk.

Take the Negative Chinup/Dip Challenge

Want to challenge yourself in the weight room and improve your strength and fitness?  Try the Men’s Health Negative Chinup/Dip Challenge.  The goal of this challenge is to do 1 negative dip and 1 negative chinup.  Sounds simple enough, right?

First, some background: Eccentric training, which involves focusing on the lowering (or, “negative”) phase of an exercise, can potentially trigger greater strength gains than concentric (lifting-focused) training, according to Ellington Darden, Ph.D. and author of The Body Fat Breakthrough.

“Your muscles can handle more weight during the lowering phase,” Darden says. “And if you draw out that phase to a minute, as you will with the negative dip and negative chinup, you can recruit up to 40 percent more muscle fibers and enjoy a surge in muscle-building hormones.” The result: more power and strength in significantly less time.

Here’s how to perform these exercises:

Negative Chinup

Grab the bar using a shoulder-width, underhand grip and hang at arm’s length with your ankles crossed behind you. Pull your chest up to the bar. Lower yourself slowly, half an inch at a time.

Negative Dip

Grab the bars of a dip station and lift yourself so your arms are straight. Lean forward slightly and lower your body slowly — half an inch at a time — until your upper arms are below your elbows.

The Challenge: You’ll be completing only two reps total (one per move), but they’ll probably be two of the hardest reps you’ve ever done. “Take one minute to lower yourself for each exercise, and rest two minutes between them,” says Darden. If you can’t last longer than 30 seconds, your eccentric strength needs a lot of work.

Get STRONGER, Get FASTER!

Your thoughts?

Eccentric Training Improves Strength and Force Development

“Eccentric (ECC) actions, when emphasized during resistance training, may elicit greater strength adaptation, muscular hypertrophy, acute increases in subsequent concentric (CON) force capabilities, and favorable acute inflammatory response compared with traditional ECC/CON actions and CON muscle actions alone,” according to research from the Journal of Strength and Conditioning Research. (Kelly, et.al.)

Multiple studies show that athletes can augment traditional, concentric training with eccentric training to increase force capabilities.

The eccentric phase of an exercise (also known as the negative phase) is usually when the weight is lowered in preparation for the next concentric (push) action.  For example, an eccentric bench press would consist of lowering a barbell from a fully extended elbow position to the chest in a continuous, controlled manner for 3-4 seconds.

Try adding an eccentric set to your usual training.  If you usually perform three sets of a particular exercise, make the last set an eccentric set.

Or, make one training day per week an eccentric training day.  If you train three days per week, perform all exercises and sets eccentrically on your middle day.

For more advanced, proficient athletes (in the weight room), if you have access to a spotter or two, try overload eccentric training, using 100% or more of your 1RM.  (Note — a spotter is usually a good idea for many exercises, including weighted exercises done eccentrically, even with lighter loads)

This strategy is not only for weighted exercises.  Eccentric training also works well with body-weight exercises, such as the squat, pushup, chinup, dip, etc.

When is comes to strength training — think negative, gain positive.

Get STRONGER, Get FASTER!

Your thoughts?

How to Improve Force Production

There are many factors that affect force production (the amount of force produced in a muscle, or muscles).  Improvements in force production can optimize sport-specific skill performance, including running, jumping, throwing, and hitting/striking.

Lift Heavy

Lifting heavy weight (e.g, 65-80% 1RM) produces greater tension in the muscle which, in turn, leads to greater motor unit (neuromuscular) recruitment, which affects force production.  The number of active motor units is directly proportional to the amount of force production.  (It should also be noted that heavy lifting and explosive concentric training [see below] have the potential to activate more fast-twitch muscle fibers)

Preloading

Preloading is the tension developed in the muscle before you move the weight.  When you bench press, deadlift, or squat, you can’t move the bar off the rack or floor until sufficient force is developed in the muscle to overcome the inertia of the barbell.

Overload Eccentric Training

Use very heavy resistance (≥ 100% 1RM) to perform “negatives,” which emphasize the lowering phase/movement of a lift.  For safety reasons, it may be advisable to use a spotter (or spotters) for certain exercises, such as the bench press, to assist in returning the weight to the original (up) position.

Explosive Concentric Training

When training for explosive concentric movements — where the goal is generating velocity — use relatively light resistance.

Plyometrics

Plyometric exercises exploit the stretch-shortening cycle to generate maximum force in minimum time.  This involves “prestretching” a muscle immediately before a concentric action to enhance force production during the subsequent muscle action.

Rest

It’s important to incorporate rest days into your training regimen in order to allow muscles time to recover and repair.

Get STRONGER, Get FASTER!

Your thoughts?

Take the Negative Chinup/Dip Challenge

The Men’s Health Negative Chinup/Dip Challenge is all the rage this week at Athletic Performance Training Center.  The goal of this challenge is to do 1 negative dip and 1 negative chinup.  Sounds simple enough, right?

First, some background: Eccentric training, which involves focusing on the lowering (or, “negative”) phase of an exercise, can potentially trigger greater strength gains than concentric (lifting-focused) training, according to Ellington Darden, Ph.D. and author of The Body Fat Breakthrough.

“Your muscles can handle more weight during the lowering phase,” Darden says. “And if you draw out that phase to a minute, as you will with the negative dip and negative chinup, you can recruit up to 40 percent more muscle fibers and enjoy a surge in muscle-building hormones.” The result: more power and strength in significantly less time.

Here’s how to perform these exercises:

Negative Chinup

Grab the bar using a shoulder-width, underhand grip and hang at arm’s length with your ankles crossed behind you. Pull your chest up to the bar. Lower yourself slowly, half an inch at a time.

Negative Dip

Grab the bars of a dip station and lift yourself so your arms are straight. Lean forward slightly and lower your body slowly — half an inch at a time — until your upper arms are below your elbows.

The Challenge: You’ll be completing only two reps total (one per move), but they’ll probably be two of the hardest reps you’ve ever done. “Take one minute to lower yourself for each exercise, and rest two minutes between them,” says Darden. If you can’t last longer than 30 seconds, your eccentric strength needs a lot of work.

Get STRONGER, Get FASTER!

Your thoughts?